How to use liquid silicone to make mold?
Unleash your […]
How to use liquid silicone to make mold? Read More »
All Articles
What is pipe beveling?
The content appearing on this webpage is for informational purposes only. LS makes no representation or warranty of any kind, be it expressed or implied, as to the accuracy, completeness, or validity of the information.
What is pipe beveling? Read More »
What is RTV silicone adhesive used for?
RTV silicone is more than just ‘glue’, it is an engineering material that reacts chemically at room temperature to form a high-performance elastomer.
What is RTV silicone adhesive used for? Read More »
Bottoming Tap vs. Taper Tap: Which Clears Blind Holes Faster?
In precision machining, there is no “bottom tap vs. taper tap”. There is only professional collaboration that follows the golden rule of “taper hole -> plug hole -> bottom tap”. Speed comes from the correctness of the process, not the performance of a single tool.
Bottoming Tap vs. Taper Tap: Which Clears Blind Holes Faster? Read More »
Laser Etching vs. Engraving: Which Delivers Deeper Precision?
Laser etching has significantly surpassed traditional laser engraving with its micron-level processing capability (minimum line width can reach 0.01mm), cold processing characteristics with almost zero thermal impact, and sharp edges without deformation,
Laser Etching vs. Engraving: Which Delivers Deeper Precision? Read More »
Fuel Leaks & Cargo Jams: LS’s 5-Axis Tech Cuts 89% Failures
Facing the industry’s chronic problems of fuel leakage and cargo congestion, LS’s 5-axis precision machining technology has provided a disruptive answer with an 89% failure reduction rate – by reconstructing the mating surfaces of key components with micron-level precision
Fuel Leaks & Cargo Jams: LS’s 5-Axis Tech Cuts 89% Failures Read More »
Vertical Fin & Fuel Connectors: LS’s 5-Axis Machining Cuts Failures 91%
When the aviation manufacturing industry faced a 91% failure rate in 5-axis machining of vertical tails and fuel connectors, LS rewrote the industry standard with systematic process innovation. Through the coordinated application of targeted micro-jet cooling,
Vertical Fin & Fuel Connectors: LS’s 5-Axis Machining Cuts Failures 91% Read More »
How Does Black Oxide Concentrate Improve Metal Finishing?
Black oxide concentrate technology is far more than a simple “dyeing” process. It builds a multifunctional protective layer on the metal surface through a precise chemical reaction and subsequent sealing treatment, while achieving excellent rust protection, excellent friction reduction and wear resistance, absolutely no risk of hydrogen embrittlement, beautiful matte appearance and excellent coating adhesion base.
How Does Black Oxide Concentrate Improve Metal Finishing? Read More »
Desktop Printer vs. Metal Beast: Can You 3D Print Stainless Steel?
Stainless steel can be 3D printed, but not all printers can control this “metal beast”. Desktop printers (FDM) can only “indirectly print” through metal filling wires, relying on complex degreasing and sintering post-processing, and finally obtain metal parts with reduced performance.
Desktop Printer vs. Metal Beast: Can You 3D Print Stainless Steel? Read More »
How Can ONE Tool Cut Multiple Thread Sizes?
The core of a tool to achieve multi-size thread processing lies in the dual innovation of breaking through geometric rigidity and freedom of movement: the adjustable die changes the cutting diameter through radial telescopic blades (adapting to ±3mm range);
How Can ONE Tool Cut Multiple Thread Sizes? Read More »
Elevator Links & Stabilizer Hinges: 89% Jet Failures Start Here
Although the elevator linkage and stabilizer hinge are small, they carry the core lifeline of flight safety. The root cause of 89% of jet aircraft failures reminds us that the defense line of aviation safety is often built on the most basic mechanical truth
Elevator Links & Stabilizer Hinges: 89% Jet Failures Start Here Read More »