LS - LS Manufacturing

What is the difference between urethane casting and injection molding?

The core difference between urethane casting and injection molding lies in material properties, production efficiency and precision level. Urethane casting uses room temperature curing resin, which is fast and low cost (especially for small batches), but is limited by strength (≤80 MPa) and precision (±0.3 mm), and is suitable for flexible, low-load short-term parts (such as cushions,

April 30, 2025

What is the difference between urethane casting and injection molding? Read More »

What Determines the True Cost of Plasma vs Laser Cutting?

Is plasma cutting cheaper than laser cutting?

In the

April 29, 2025

Is plasma cutting cheaper than laser cutting? Read More »

Types of Thread Taps: How to Choose the Right One?

Choosing the right thread tap requires comprehensive consideration of four key factors: processing materials, hole characteristics, production batch and precision requirements. For hard materials such as steel, cobalt-containing high-speed steel or coated taps should be used.

April 28, 2025

Types of Thread Taps: How to Choose the Right One? Read More »

How to predict the “invisible killer” of brake discs?

What Grounds Jets? Brake Discs & Retraction Actuators Under Fire

The core causes of frequent groundings of jet aircraft are the thermal decay effect of brake discs and hydraulic hysteresis of retraction actuators: Emirates Boeing 777 failed due to delamination of carbon fiber brake discs at 1200℃ (NTSB report AAR-24/01), exposing the thermal resistance limit of traditional materials; Airbus A320neo fleet caused a 300% surge in the risk of landing

April 25, 2025

What Grounds Jets? Brake Discs & Retraction Actuators Under Fire Read More »

What are the core safety functions of aircraft landing gear struts and axles?

Landing Gear Struts & Wheel Axles: 7 Critical Factors for Aircraft Safety

As the core load-bearing components for aircraft take-off and landing, the reliability of landing gear struts and axles is directly related to flight safety. Key control factors include: material metallurgical quality (must comply with AMS 6414 ultra-high strength steel standards),

April 24, 2025

Landing Gear Struts & Wheel Axles: 7 Critical Factors for Aircraft Safety Read More »

What is HIPS 3D printer filament？

HIPS (High Impact Polystyrene) is an engineering plastic optimized for 3D printing that combines high strength, impact resistance, and soluble support properties. It is suitable for dual-printhead printing, often used as a support material with ABS, and can be easily dissolved with limonene solvent,

April 23, 2025

What is HIPS 3D printer filament？ Read More »

14 Types of Reamer Tools Used in Machining

The 14 types of reamers in machining have their own characteristics and are suitable for different machining needs: straight groove reamers have good rigidity but poor chip removal, which is suitable for short hole machining; Spiral flute reamer for smooth chip evacuation, suitable for deep holes and viscous materials

April 22, 2025

14 Types of Reamer Tools Used in Machining Read More »

Titanium vs. Tungsten: What’s the Difference?

The core difference between titanium and tungsten is that titanium is known for its light weight, corrosion resistance and biocompatibility, making it

April 21, 2025

Titanium vs. Tungsten: What’s the Difference? Read More »

What Breaks First in Aircraft Structures? Cargo Floors & Keel Beams Exposed

In the

April 18, 2025

What Breaks First in Aircraft Structures? Cargo Floors & Keel Beams Exposed Read More »

Why Do 58% of Cabin Door Failures Start with a Single Hinge?

What Grounds Jets? Door Hinges & Seat Tracks Under Fire

The grounding of the aircraft once again warns the aviation industry that safety is no small matter. Even seemingly basic components such as door hinges and seat tracks may trigger a chain reaction and threaten flight safety once there are design or manufacturing defects.

April 17, 2025

What Grounds Jets? Door Hinges & Seat Tracks Under Fire Read More »

What is the difference between PVA and HIPS?

In the field of 3D printing, PVA and HIPS are two mainstream support materials with significant differences: PVA (polyvinyl alcohol) is a water-soluble material, especially suitable for use with low-temperature consumables such as PLA, which dissolves quickly, is environmentally friendly and easy to operate; while HIPS (high-impact polystyrene) needs to be dissolved with limonene solvent.

April 16, 2025

What is the difference between PVA and HIPS? Read More »

4 Types of Silicone and Their Differences

In industrial applications, it is crucial to choose the right type of silicone. HTV silicone has excellent high temperature resistance and is suitable for automotive and industrial sealing; RTV silicone is easy to operate and is ideal for electronic potting and building sealing

April 15, 2025

4 Types of Silicone and Their Differences Read More »

LS Manufacturing

CNC Machining Services

Prototyping & Production

Sheet & Die Processes

Surface Finishing

Other Support

First Article Inspection (FAI)

Reverse Engineering

Inspection Services

Other Support

First Article Inspection (FAI)

Reverse Engineering

Inspection Services

What is the difference between urethane casting and injection molding?

Is plasma cutting cheaper than laser cutting?

Types of Thread Taps: How to Choose the Right One?

What Grounds Jets? Brake Discs & Retraction Actuators Under Fire

Landing Gear Struts & Wheel Axles: 7 Critical Factors for Aircraft Safety

What is HIPS 3D printer filament？

14 Types of Reamer Tools Used in Machining

Titanium vs. Tungsten: What’s the Difference?

What Breaks First in Aircraft Structures? Cargo Floors & Keel Beams Exposed

What Grounds Jets? Door Hinges & Seat Tracks Under Fire

What is the difference between PVA and HIPS?

4 Types of Silicone and Their Differences

LS Manufacturing Ltd

Capabilities

Resources

Contact

Prototyping & Production

Sheet & Die Processes

Other Support

First Article Inspection (FAI)

Reverse Engineering

Inspection Services

Other Support

First Article Inspection (FAI)

Reverse Engineering

Inspection Services

LS

All Articles

LS Manufacturing Ltd

Capabilities

Resources

Contact

Get Free Quote