If you encounter the problem of not spraying water when using CNC machining center, do not panic! This problem can be caused by a variety of reasons, but it can usually be solved in a short time, so, the following is the solution:
First, you need to check the water pipes in the CNC machining center. Make sure the water pipes are not damaged or blocked. Even a small blockage may result in insufficient water flow. If the water pipe is damaged, it needs to be replaced.
Second, you need to check the quality of the coolant. If the quality of the coolant is poor, it may result in no water spraying. Make sure the coolant you use meets the requirements. If your coolant doesn’t look fresh, it needs to be replaced.
In addition, you also need to check the solenoid valve working condition. Solenoid valves are usually used to control the flow of water. Ensure that the solenoid valve is working properly. If the solenoid valve is faulty, it needs to be replaced.
Finally, you need to check the water pump in the precision CNC machining center. Water pump is the core part of CNC machining center. If the pump is damaged, the processing center will not spray water. Make sure that the water pump is working properly. If the pump is faulty, it needs to be replaced.
Water spraying system is very important to the normal operation of CNC machining center, and it is very necessary to maintain it. Only in the normal operation of the sprinkler system, to ensure the long-term stable operation of the machine.
The above is to solve the problem of CNC machining center does not spray water. If your machine does not spray water, you can follow the above steps to check to determine the cause of the problem. If you cannot resolve the problem, contact a professional technician. They can help you more.
